Balanced vs Unbalanced Connections

An Unbalanced connection has one signal wire and one ground wire that serves as a voltage level reference and often also as a shield against interference. Any noise induced in the signal wire will appear in the terminating circuit.

A Balanced connection has two signal wires, with the second signal being of opposite polarity (180 degrees out of phase) to the first. Any noise induced in the connection will appear on both signals. At the receiving circuit, the second signal is inverted and added to the first signal. This doubles the level of the signal and subtracts out all the noise.

Fetus Clipart
Abortion is a hot topic these days, with strong and cogent opinions on both sides and many in the middle. Here are my thoughts on the issue.

By DoctorG15 on September 22, 2023

Red Wagon
The Little Red Wagon is a modern parable inspired by Scriptures such as 2 Cor. 5:17.

By DoctorG15 on September 18, 2023

Biblical theology, interpretation of the Bible, can take many different directions. Which one is the right one?

By DoctorG15 on August 9, 2023

Vogtle 3 Reactor
The Vogtle 3 nuclear reactor is now in commercial operation in Waynesboro GA.

By DoctorG15 on August 1, 2023

Vogtle Reactor
Nuclear power is likely the only green technology that will enable us to deal with the problem of earth warming.

By DoctorG15 on April 28, 2023

Grave Opened
A brief discussion concerning what the Bible says about resurrection.

By DoctorG15 on April 27, 2023

This is primarily an excerpt from an article on Malware from AI Bots that appeared in Wired Magazine.

By DoctorG15 on April 28, 2023

Parables are meaningful stories. Where are they in John’s Gospel?

By DoctorG15 on November 8, 2022

In late 2021, Snap One introduced their new Episode WAKE in-wall amplifier wall module.

By DoctorG15 on June 18, 2022